Chrome Oil Filter Housing + Chrome Tensioner Bolt

I pulled these pieces as well from my 12v VR6 engine.

The tensioner was bought new, then chromed, and the filter housing was used.

$125 for the filter housing. + shipping
$25 for the tensioner. + shipping

$150 shipped anywhere in the lower 48 for both.

MK3 25th Anniversary Interior

I've got two sets of seats, both front and rear, a set of red seatbelts, and an e-brake handle with the red button.

For the complete setup (seats, belts, ebrake) for $1400
belts only $325
ebrake only $100
belts & ebrake $350
seats only $1000

Chrome VR6 Alternator - $350

During the first 4 years of my cabrio being off the road I decided it was a good idea to chrome a bunch of parts. Then before I got the pleasure of even driving the car, someone offered me a bunch of money for the supercharger kit, then eventually I parted the rest of the 12v and sort of decided on a gt30 induced R32 swap.

Long story short, I have this and wont be using it anytime soon.

The alternator was professionally rebuilt by K & K Automotive (301.663.5258) along with my starter, which may soon be for sale. The rebuilt alternator literally has 5 miles on it and is in great shape obviously. The only problem I have with the chrome is that where the unit is bolted to the accessory bracket it has some small chips in it from being put in and removed.

I will ship this at the purchasers expense plus an additional 3% charge for paypal.

Syncro Driveline Parts

I've had these for awhile, and wont be getting around to a syncro mk2 build anytime soon, so Im going to list them here.

Im including a syncro transmission (4 cylinder), transfer case and rear end.

The price is $500 picked up in Frederick, MD.

New bumpers for my project

I just got these back last weekend from a pal in PA. We worked out a sweet trade so I cant really say how much it would cost to replicate these, but Im friggin stoked.

They started as textured OEM euro golf bumpers.
On the front the marker lights were filled along with the lower air ducts in addition to the "credit card" indentation typically in the center of the plate recess. A north american lip was then molded in, which in my opinion is pretty ballsy.

The rear had the tow hook shaved along with the exhaust cutout, which means I've got to sort that sometime soon as well.





Thanks Mike!

2006 VW Jetta TDI - $12,000.00

Scroll down for the basics.

Its time for me to sell my personal car. I purchased this new at Fitzgerald AutoMall in Frederick, MD when I traded in my R32 for something more practical as commuting 90 miles round trip each day was economically feasible in something I was tempted to constantly cruise around in at 80 miles an hour, which in 6th gear returned a lackluster fuel economy of 22mpg.

When I stepped into this I knew that I would be sacrificing performance and all wheel drive but I gained a ton of space for myself and 4 adult passengers, lower auto insurance premiums and 23 additional mpg while crusing at 80mph on my commutes. Even while cruising at 80mph I still manage to get 520 miles on a tank before it runs dry.

Now that my wife and I have our first child we need something a little bigger and more wagonish to lug around the stroller, pack n play, diaper bags, misc toys etc.

I have had this car serviced by Eurotech Motorsports from day one for everything from oil changes to the mandatory timing belt service which I took a pre-emtive strike towards and had it done at 90k.

This car runs great and has never had any issues at all, and if it wasnt for the self imposed need for more space I would be keeping it. The car isnt perfect but also isnt far from it. All 4 wheels have curb rash and there are some paint chips in the hood from road debris, and the lip is scraped on the drivers side. (see photo) but thats where it stops. No dents, repainted panels, crazy scrathes, nothing.

Now that you might have read all that Im sorry. Here the info.


The details
2006 Jetta TDI
1 Owner
Average 45 mpg
Timing Belt Service completed at 90k
Proper VW spec synthetic oil used
All service completed at Eurotech Motorsports in Frederick, MD (301.371.0700)
Current mileage is 102,000
White exterior
Charcoal Leatherette
6 disc mp3 compatible CD player
Alloys's

If you want more details or to come see it email me at bigbentley25@gmail.com

Polo 1.4 3cylinder TDI swap for sale $3000

I sold this to a customer awhile back who never used it as planned. Its been in storage for the last 4 years, but was pulled while running.

The swap includes the engine harness, cluster, ecu and complete longblock.

I sent the ecu to Rocket Chip to have the immobilizer removed as well as adjust the fuel and timing for more performance. With the upgraded ecu you should expect to see a 20%+ gain in HP & torque.

This swap is available for immediate pickup in MD. I will deliver within 200 miles for an additional $100.00.

This is the only 3cylinder VW diesel in America that I am aware of and would be a perfect swap for any MK1 Rabbit, MK1 Caddy or MK1 Cabriolet.

When fitted to the Polo these cars averaged 62+ combined MPG.

Adaptec Speedware - 4x100-5x112 adapters!!

Our longtime pal Matt has just introduced his newest product which allow you to use Mercedes or Audi wheels on your 4 lug watercooled VW. No longer will you have to swap to a 5x100 VW bolt pattern (up to $500), then get adapters(another $300).

Another advantage is that by using their skinniest adapters at 15mm you're not pushing your wheels the additional 5mm as a 5x100 setup requires you to do, prior to using an adapter.

1947 Chopped Chrysler Windsor

1947 Chrysler Windsor 4 dr.
Exterior- 4" chop,Dropped, 4 door, with suicide rear doors, shaved trim and handles, Frenched 59' caddy tails, Blue dot headlights, Desoto rear bumper, chrome wheels and hubcaps, Koker wide white walls, Satin black paint with two tone lime green pinstripping.
Interior- All new custom glass, New black interior, cuustom shaved and pinstripped dash, custom column shifter, 1950 custom chevy steering wheel, bamboo headliner, new hidden kenwood cd player with remote (i-pod compatable) with all new infinity speakers. Custom window cranks, painless wiring kit. new carpet in trunk

Motor- Chevy 283 small block, turbo 350 auto trans, new batwing air cleaner(pinstripped), oldschool chevy script valve covers, offenhauser high rise intake manifold, new dual side exit exhaust, nova front sub-clip, new hei distributer new alternator, Battery, fan belt, etc.

Comes with and extra mint hood, two spare trunks, dash, etc.

Contact the owner here.

http://forums.vwvortex.com/zerothread?id=4496051#59391663

Audi A4 B6 euro trunk - $250

This was stored for a while at Euro Auto Source in York, PA which is where it picked up the sweet latex paint overspray on it, so odds are that you have seen it before if you been in the shop.

The trunk lid originally had a factory installed spoiler so there are some holes in the top near the edge that would obviously accept another factory spoiler, or possibly some aftermarket ones as well.


The facotry paint might be something you're able to buff out, and its obviously very dusty. Upon pickup I will also throw in a euro hazard triangle.

Euro front rubstips - $25 picked up

I've got a couple of these 1 textured, 1 smooth. Due to its size I dont want to ship, so a local is going to get a deal on these.

Pics available.

R32 6 speed Transmission, 30k miles on it - $1100

I got this along with a longblock for my own project, but I wont be using it anytime soon. I will ship this at the owners expense.

No transfer case is included.

A couple turbo diesels sitting around.

I've got a sub 100k AAZ setup that needs an alt. for $1400 and a sub 100k A1Z that also needs and alt. for $1700 if anyone is interested. The A1Z has a harness, ecu & cluster. The AAZ has something of a harness but its not really needed since its a mechanical pump. Get a starter on it, provide fuel and it will spin till you shut off the fuel.

email me at bigbentley25@gmail.com

Its almost here! Ford Transit Connect

I think Ford is going to hit a home run with this thing!
I've always had a soft spot for utility vehicles and this is remarkable.
Im glad to see an American company thinking outside of the box and bringing something to market that will have a million real world uses.

Chrysler found great success with the rebadged Mercedes transporter and Ford will certainly do the same.



more info here.

aluminum vr6 valve covers

I had every intention of having these modded like I did for the T4 valve cover, but since there is little to no market for custom parts these have got to go. These will work on any 12valve vr6 engine. While they are dirty, its nothing a chromer cant fix. Speaking of chrome, shortly I'll upload all the chrome VR6 parts I have actually pulled from the project car.

$50.00 each shipped to the lower 48 or $120 shipped for all 3.
$40 each if picked up locally.

email me at bigbentley25@gmail.com for info on these.

24V Euro engine cover

I found this in my parts bin some time ago and wont be needing it. Its a rare (for North America) piece. Its doesnt add any performance but is a +5 in the cool factor. $150 shipped to the lower 48 including paypal fees. email me at bigbentley25@gmail.com for more info. All the tabs are intact and this will fit 24 valve 2.8 VW engines.





Here is a picture of one with the runners painted. Click on the picture to see the full size.

Audi TT Bucket Seats

I've had these for a few years and need the space. The base of one of the seats was recovered, and needs to have the leather "warmed up" still so it will stretch properly. I have not done this as I've never sat in them since it was recovered. They are not perfect, but would be a great low budget option for a MK2, MK3 or MK4.

All of the airbags are in place, and these recline forward as they are from a coupe.
I dont want to ship these due to the weight, so they must be picked up in Frederick, MD. 300 bucks takes these. email me @ bigbentley25@gmail.com

MK2 Euro Tails - $75 shipped

I've got a ton of these around + the bulb trays that go with them. They are obviously used and need to be cleaned up, but for $75.00 including shipping and paypal fees its the cheapest game in town!

WRX STI Roof Spoiler

Somehow or another I ended up with this roof spoiler. Im not entirely sure if its an STI specific piece or WRX specific or what. If you want it, its yours for $50 picked up in Frederick, MD or $80 shipped including paypal fees.

Right Hand Drive Pennsylvania Titled VW Polo

As part of my purchase of the inventory of eCode Parts I acquired this gem. Its a running and driving 1977 VW Polo. It is rumored to be 1 of 4 in the country. I know of one in Pennsylvania, 1 in Virginia and another somewhere in New England.

I've had this car parked for the last few years, but it still fires up the first time, every time. (it probably has something to do with the fact that there are only 59 thousand original miles on it)

One thing in particular that makes this car stand out is that it has the original early small metal bumpers which are quite rare. I also have a spare late style plastic bumper set along with the matching grill.

The exterior was resprayed about 4-5 years ago in its original Miami Blue, however the car sat to long in its primered state and has developed some paint bubbles.

The interior of this car is its worst quality as I believe the car sat in a glass front garage for many years, which would explain the lack of rust on the car but the overall condition of the bench and front buckets.

The dash and steering wheel are in great shape along with the door panels.
The only aftermarket modification to this car is the sliding ragtop, which I don't really understand myself. I'll most likely replace the sliding unit with a vinyl snap in place top.

I'm open for trades of all sort on this car, but cash works as well. Ideally if I include all the spare parts I have for this car I would like $6500.00, so a trade in that ballpark would work to.

I am located in Frederick, MD about 45 minutes North of Washington, DC and 45 minutes West of Baltimore.

email me @ bigbentley25@gmail.com for more info.